CONVENIENCE WITHOUT COMPROMISE
The challenge: to design an integrated audio amplifier with none of the compromises usually associated with this approach. Our design team has surpassed the challenge. The B-60 provides 60 watts per channel at 8 ohms and 100 watts per channel at 4 ohms. There are provisions for four high level inputs, (CD, Tuner, Video and Aux) in addition to one tape loop and a pre-out/main-in feature. A headphone jack is provided for those requiring monitoring and private listening provisions. An optional motor driven volume remote control is also available. This motorized volume approach ensures the lowest possible distortion of the audio signal.
Options Include:
• Bryston Internal DAC
• Bryston Internal MM Phono Stage
• Bryston handheld remote volume control
HAND ASSEMBLED WITH CARE
Bryston hand assembles and individually tests each and every product we manufacture. We exclusively use only the finest components in our amplifier designs, such as 1% metal-film resistors, polystyrene capacitors and hand selected and matched transistors to reduce noise and distortion to
the absolute minimum. Bryston applies techniques and employs custom materials in our everyday construction of electronic equipment that are more typically utilized in military and aerospace industries. Our traditional adherence to proprietary parts and sophisticated construction and testing techniques guarantees your amplifier will perform for many years without concern. It also prevents any unit to unit variability which inevitably is the result of any mass produced product.
PRE-OUT/MAIN-IN:
A versatile feature on the Bryston B-60 integrated amplifier is the pre-out/main-in connectors. It allows the independent use of the preamplifier or stereo amplifier section within an audio or video system.
PERFORMANCE WITHOUT COMPROMISE
With today’s increased clarity and dynamic range in recordings and movie soundtracks you need equipment that not only equals but surpasses the parameters of the most demanding material available. The Bryston B-60 Integrated Amplifier is without peer in meeting this performance challenge.
|
B-60 SST C-Series Specifications
|
|
Preamplifier
|
|
Frequency Response
|
20Hz-20kHz +/-0.05dB
|
|
Maximum output
|
15 volts
|
|
IM or THD
|
<0.005% a 3 volts out
|
|
High Level Sensitivity
|
500mV
|
|
Features
|
-
4 stereo RCA inputs
-
1 stereo RCA output
-
1 stereo tape loop
-
Headphone output
-
Gold plated switch, contacts and connectors
-
Optional remote, volume and mute
-
Also Available with Moving Magnet Phono Stage
-
Available Now w/ Silver Faceplate
|
|
Amplifier
|
|
Watts
|
60 watts per channel, 8 ohms
100 watts per channel, 4 ohms
|
|
Harmonic distortion
|
Less than 0.02% from
20 Hz to 20 kHz at 60 watts
|
|
IM distortion
|
Less than 0.01% from 10 milliwatts to 60 watts
|
|
Noise
|
106dB below full output
|
|
Slew Rate
|
> 60 volts per microsecond
|
|
Power bandwidth
|
0.5Hz to over 100 kHz
|
|
Damping Factor
|
Over 500 at 20 Hz, ref. 8 ohms
|
|
Input sensitivity
|
0.775 volt in for full output 50 K
& impedance
|
|
Features
|
-
Regulated power supplies to all voltage gain stages
-
Each channel employs completely independent power supply Will deliver full output to any phase angle at 4 ohms or higher
-
1 stereo RCA input, 50 K
-
Pre-out/main-in connectors
-
Optional rack mount available
|
|
A/C Power
Consumption &
Heat Load
|
|
1. Idle Current
|
38W
|
|
2. Each Chan. 8 Ohms (60W ea.)
|
302W
|
|
3. Each Chan. 4 Ohms (100W ea.)
|
475W
|
|
4. Max. Wattage
|
475W
|
|
5. Max. Heat Dissipation
|
275W / 939 Btu/Hr
|
|
|
Dimensions
|
17 x 1.75 x 10.5 inches
|
